Gtir Motorsport club

Welcome to the largest Nissan Pulsar & Sunny GTI-R Forum. Masses of info, friendly members, cars for sale, lots of spares. Best forum on the net by far. Everything your gtir needs is here.


You are not connected. Please login or register

Gtir Motorsport club » General Discusion » Gtir related Discussion » Picture needed.. (Not that type!)

Picture needed.. (Not that type!)

View previous topic View next topic Go down  Message [Page 1 of 1]

1 Picture needed.. (Not that type!) on 16th November 2015, 10:37 pm

burrows1980

avatar
I thought I was doing well putting her back together but I could do with a picture inside the drivers wing even better with the wing off! Can't remember how the loom, bonnet release and screen wash pipes ran. One of the many pictures that got wiped off the hard drive Mad

I've got two large clips, I assume the loom is fixed back with these, but as for the rest not got a clue!

Cheers

Gaz

2 Re: Picture needed.. (Not that type!) on 16th November 2015, 10:42 pm

Stu

avatar
Admin
Admin


_________________
Back againTwisted Evil
http://www.j10-meets.co.uk

3 Re: Picture needed.. (Not that type!) on 16th November 2015, 10:46 pm

Stu

avatar
Admin
Admin
This is the best I can do for the bonnet catch.


_________________
Back againTwisted Evil
http://www.j10-meets.co.uk

4 Re: Picture needed.. (Not that type!) on 16th November 2015, 10:49 pm

pulsarmoley

avatar
moderator
moderator
If you can wait till tomorrow evening i can get you the photos Wink


_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

5 Re: Picture needed.. (Not that type!) on 16th November 2015, 10:55 pm

burrows1980

avatar
Nice one, cheers Stu. Bonnet release cable under the wing I meant but can see in the photo where it goes.

More photos the better really, putting the screen wash thingy back where it suppose to go, getting rid of front mount (well cut half the front end out front mount Laughing ) figured out how it fits just can't remember what clipped where etc

6 Re: Picture needed.. (Not that type!) on 16th November 2015, 11:00 pm

pulsarmoley

avatar
moderator
moderator
Ive still got my wing on but the plastic arch is removed, will get as many photos as i can for you as im up my unit tomorrow finishing a few things before the engine removal


_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

7 Re: Picture needed.. (Not that type!) on 17th November 2015, 5:54 pm

pulsarmoley

avatar
moderator
moderator
Here you go fella hope these help...




_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

8 Re: Picture needed.. (Not that type!) on 17th November 2015, 6:37 pm

burrows1980

avatar
Nice one mate, exactly what I needed cheers

Moving on to today's problem, is there a bracket the header tank fits onto? When I put my front mount on years ago I had to move the tank for the IC pipe to fit past, may have binned it Mad



Seems to be two grooves in the tank so must slide onto something?

Gaz

9 Re: Picture needed.. (Not that type!) on 17th November 2015, 6:43 pm

pulsarmoley

avatar
moderator
moderator
Yeah there is a black plastic square like bracket that has a 6mm bolt holds it in place. The bolt hole should be approx 1 inch forward of a chassis earth.


_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

10 Re: Picture needed.. (Not that type!) on 17th November 2015, 7:47 pm

burrows1980

avatar


I thought it would fix in that hole, only one left Laughing will have a look in the box of bits.  At least I know what I'm looking for now, thanks again matey.

11 Re: Picture needed.. (Not that type!) on 17th November 2015, 7:55 pm

pulsarmoley

avatar
moderator
moderator
That earth strap needs to be moved to the next threaded hole to the right in the pic as the bolt for the coolant bracket goes in the hole you are currently using


_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

12 Re: Picture needed.. (Not that type!) on 17th November 2015, 7:57 pm

pulsarmoley

avatar
moderator
moderator
Actually i may be wrong on that one after a closer look, when you find that little bracket you will work it out...


_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

13 Re: Picture needed.. (Not that type!) on 17th November 2015, 8:10 pm

burrows1980

avatar
Already moved the earth strap once today Laughing put it in the first hole turns out the power steering bracket goes in that, so moved it to where it is now... Will find bracket tomorrow, if I still have it that is..

14 Re: Picture needed.. (Not that type!) on 17th November 2015, 8:13 pm

pulsarmoley

avatar
moderator
moderator
Good luck finding it Laughing


_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

15 Re: Picture needed.. (Not that type!) on 18th November 2015, 12:58 pm

burrows1980

avatar
Yeah looks like I've lost it Sad anything I've ever taken off it I've kept, split hoses knackered clamps, why I kept them I don't know! But the bracket nope, anyone got a picture of the bracket, I'll so I can make something.

Cheers

Gaz

16 Re: Picture needed.. (Not that type!) on 18th November 2015, 6:32 pm

pulsarmoley

avatar
moderator
moderator
I would message bob and see if he has one


_________________
Natural selection does not work quick enough  Evil or Very Mad

Everybody needs a bosom for a pillow...

17 Re: Picture needed.. (Not that type!) on 20th November 2015, 1:17 pm

8160MIKEL


That bracket fits all N14 not just turbo,still available new but Japan order,21745-50Y00.

18 Re: Picture needed.. (Not that type!) on 20th November 2015, 5:29 pm

burrows1980

avatar
Funny you should say that, I was going to email the bloke I deal with at Nissan today to ask him to check it.. Cool nice one mate, going there tomorrow to pick some bits up will get it ordered.

Gaz

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum